Our evaporation system

Evaporator technology is the first choice to achieve no wastewater discharge in the enterprise. You can reuse up to 98% of the recyclable distillate through our evaporator. The distillate is of high quality, so you can send it directly back to your production cycle or directly discharged. The evaporator provides you with flexibility and safety, is simple to use and is dedicated to 24/7 operation.

The highlight of the ESTIMAT® LE evaporator series is natural circulation, which achieves low energy consumption, and the equipment can turn the most difficult waste water into high-quality distillate. The multi-layer separation system, namely the cyclone separator, is used to optimally purify the evaporated wastewater and ensure the operational safety of the vacuum pump and the complete set of equipment. The structure of the equipment components is used for internal heat exchange between the discharged distillate and the discharged wastewater. In addition, the equipment does not need to be equipped with additional heating devices and pumps, which means lower energy requirements and operating costs. LE stands for "Low Energy".

Wastewater technology in surface treatment industry

In surface treatment technology, different parts and tools are optimized to meet specific requirements.

The general process of Die is:

Chemical surface treatment, such as cleaning, degreasing, pickling;

Mechanical surface treatment, such as grinding and polishing;

Surface coating, such as spray paint, powder coating;

In many production processes such as pretreatment, water is an essential element, and different processes may contain different substances.

The traditional wastewater types in the surface treatment technology industry are:.

Cleaning wastewater, flushing and moving tanks, electroplating metal deposition (for example, during nickel plating), and flushing water in crack detection equipment.

Wastewater disposal is generally very expensive.

You can recycle the production wastewater through Bito's process technology, so up to 98% of the wastewater can be re-transmitted back to the production process.

Metal processing wastewater technology

The use of different processes in the metal manufacturing and metal processing industries will produce products of different quality. Including no metal shavings, surface processing and forming processes. In the various production methods of this type of process, water is an essential element, and may contain different substances depending on the process. The traditional wastewater types in the metal industry are: emulsions (coolants and lubricants), separation media (die-cast aluminum, autoclaves), cleaning wastewater, flushing and movable tanks, electroplating and grinding wastewater, and flushing in crack detection equipment Use water. This type of wastewater is generally unusable and must be disposed of. In fact, it can also be turned into treasure!

You can purify process wastewater through my technology, and you can easily transport the wastewater back to the industrial process and reuse it again. At the same time, BITO can also develop complete solutions based on your process and process water, such as the recovery of precious metals in the production line, and the optimization of the water used in the production line;

Industrial wastewater treatment through chemical processes

Depending on the composition of the wastewater, the chemistry is usually performed in a separate step. In order to treat the customer's wastewater, Bitor effectively combines these process steps with appropriate wastewater technology into a cost-effective and efficient solution.

Bitao provides chemical treatment industrial wastewater treatment processes for every application field Through processes such as sedimentation, filtration and adsorption, centrifugal separation, etc., wastewater containing water-insoluble substances or colored wastewater can be effectively treated. Air flotation is another process; in air flotation, the material particles will adhere to the fine bubbles due to adhesion; according to the composition of the wastewater, Bito often uses a mature chemical treatment combination to prevent subsequent treatment stages In the event of unstable operation, reliable mechanical preliminary purification is particularly important for industrial wastewater treatment.

Through targeted addition of specific chemical substances, industrial wastewater treatment will facilitate the separation of pollutants dissolved in wastewater. During precipitation, previously dissolved substances will be converted into soluble substances that can be filtered out of the liquid. Other pollutant removal methods include ion exchange, flocculation, advanced oxidation and ozone treatment.

Treatment of waste electroplating wastewater through a special membrane

MICRO-FLO is the "FIL-SEP" microfiltration membrane where the heavy metal industrial wastewater treatment equipment is located. The filter was developed by the American Nihon company and installed in it. "FIL-SEP" is a unique tubular membrane structure, which is most suitable for heavy metal industrial wastewater treatment. The heavy metal hydroxide is completely separated and concentrated.

MICRO-FLO" has a high degree of integrity, thanks to its original membrane design and some of our achievements in the industry

Industrial wastewater treatment in the past ten years.

Professional consultation

Professional consultation

Professional consultation

Professional consultation

Professional consultation

Professional consultation

Processing technology

Industrial wastewater treatment

Processing technology

Our technology portfolio

Our evaporation system

Wastewater technology in surface treatment industry

Metal processing wastewater technology

Industrial wastewater treatment through chemical processes

Treatment of waste electroplating wastewater through a special membrane